Glass geogrid "Geoflax"

Glass geogrid is made of stekloruberoid, connected by a strong synthetic thread with polymer impregnation. This modern material is used in road construction, spreading the load of asphalt on the canvas, thereby increasing its resistance to external destructive factors. The advantages of geogrid glass "Geoflex" + Use the grid saves on investment in the construction of up to 45%, increase overhaul intervals during the operation three times, reduces the amount of building materials to 30% and thus guarantees the quality of the road. + Our geonet is applied a special coating, which increases the adhesive properties of the material needed to quickly and, most importantly, reliable contact with the pavement layers. MANUFACTURE OF FIBERGLASS As a rule, reinforced fiberglass mesh is made by weaving between bundles composed of aluminosilicate fibers with subsequent impregnation. However, there are exceptions — for example, in the sale of fiberglass DSK is manufactured by bonding the strands together using the polymer composition. By appointment distinguish fiberglass facade, building and road. The first two groups belong fiberglass fiberglass 2x2 or 5x5. They have a limited scope, so we have to consider is road geogrid. If the production of front fiberglass is made using thin filaments and cells of minimal size, the length of a side of one opening can reach 15-65 mm. GLASS GEOGRID PROPERTIES AND BENEFITS Glass geogrid properties and preimushestvenno is a flat product made of borosilicate material. It is formed into strands that are woven into bundles and intertwined in the form of a grid. Road usually fiberglass covered with synthetic polymer material or bituminous impregnation, which increases reliability and improves the physical properties. Reinforcing fiberglass is resistant to physical stress and other influences. It does not rot and does not react with most chemical compounds used in road construction and civil engineering. Among the main properties and advantages of the glass geogrid can be called low price, which resulted in its widespread. THE TYPES AND SPECIFICATIONS OF FIBERGLASS There are such kinds of fiberglass meshes, different in technical characteristics, like SSP, MOP and DSC. This files most often is the production of fiberglass meshes of the MTSP. They are impregnated with a special synthetic compound that improves the adhesion and contributes to the protection against various external influences. However, the construction of major roads is recommended reinforcement geogrid SSNP, stitched with polyester thread. Price of fiberglass SSNP somewhat higher, and its strength reduced, but it is capable of absorbing a tensile load without deformation, and can form a stable homogeneous coating of large area. If construction is conducted in difficult conditions, the use of alkali-resistant fiberglass DSK with adhesive compounds. Glass geogrid differs from polymer counterparts less strength — she is able to stretch by 4% in both directions, whereas the plastic counterparts, the figure is 10-14%. However, the technical characteristics of the geoweb include very high strength — rate of the limit load equal to 50-200 kN/m vs 50-90 polymer products. If you do not consider the construction of fiberglass and a material for road construction, it is often used to reinforce asphalt pavement. The use of fiberglass helps to avoid punching the top layer of the pavement and to stabilize granular materials. Therefore, the cost of fiberglass usually pays for itself quickly due to a significant increase in the durability of the transport path, and reducing overhaul costs. If to speak about other fields of applications, for which you can buy fiberglass. among them should be called landscape design and construction of large objects, where the material is used for soil stabilization. In addition, according to GOST, geogrids used in the construction of dams, bridges, dams and other structures, as well as the creation of airports and runways.