Planed molding

Molded products are woodworking products manufactured on planer-profiling equipment. Planed molding: plinth, platband, door frame spliced on pine mini-bearing. * Cladding board - board, on the sides of which grooves and ridges for the connection. Material - pine 1-2 grade according to GOST 8486-86. Nominal dimensions: thickness up to 16 ± 1 mm, width up to 130 ± 1 mm, length up to 6000 ± 10 mm. Humidity 10 ± 2%. The blank is a rectangular board glued along the length of the (micro-bearing) toothed glue joint. The length of the glued blanks from 150 mm. The strength of gear adhesive joints in static bending according to GOST 15613.4-78 should not be lower than 30 MPa (300 kg / m2). Wood defects and processing. * Plinth Material - pine. The size is 12 * 45/55 * 2500 mm. The plinth spliced, preparation length not less than 180 mm. Humidity blanks 10 ± 2%. Splicing blanks on minishhip length 11 mm according to the requirements of GOST 19414-90. Characteristics of plinth: - on the front side are not allowed: healthy knots, fused, partially fused, falling out, rotten, tobacco; cracks; core; wormholes; mechanical damage, chips, neproprog; - on the non-face side allowed: core; non-through cracks no more than 2 mm wide. * Grouse Material - pine. The size is 13 * 34 * 2000 (2100) mm. Spliced spliced, workpiece length not less than 180 mm. Humidity blanks 10 ± 2%. Splicing blanks on a toothed spike with a length of 11 mm according to the requirements of GOST 19414-90. Characteristics of the splat: - on the front side is not allowed: knots are healthy, accreted, partially fused, falling out, rotten, tobacco; cracks; core; wormholes; mechanical damage, chips, neproprog; - on the non-face side allowed: core; not through cracks no more than 2 mm wide.